Power Kit adds haptic feedback to capacitive touch
2014/01/13
Developed by Texas Instruments and Farnell, it is based around two TI chips: the DRV2603 (and here) resonant motion driver and newly-released MSP430TCH5E ‘haptics-enabled microcontroller’, as TI calls it.
The driver includes a four-mosfet full-bridge driver for linear resonant actuators – which are essentially loudspeaker voice coils driving a mass, rather than a cone.
These things have high Q and a temperature-dependant production-dependent narrow resonant peak. “Typically they have a window no wider than +/-2.5Hz in which sufficient resonance is achieved,” said TI.
To make matters worse when a profile of vibration is required, resonant frequency can also be slightly amplitude-dependent.
An on-board DSP – called the auto-resonance engine by TI – immediately calculates the resonant frequency and adjusts the output pulse repetition frequency accordingly. “This dynamic tracking will ensure more consistent vibration. Consistent vibration is much harder to achieve with a non-auto-resonance drivers,” said the firm.
Variation in transducer gain is also automatically compensated for with, according to TI, resultant acceleration within a few percent compared with a 2:1 range when the firm’s earlier non-feedback DRV8601 was employed in tests.
Any PWM frequency presented to the 2603 between 10 and 250kHz will cause it to provide the correct output frequency.
Having calculated the actuator’s dynamic parameters, the chip can also offer dynamic braking – actively supressing ringing when the control signal is removed by applying an anti-phase waveform.
Supply range is 2.5 to 5.2V; inputs are 1.8V compatible and 5V tolerant; and the chip will also work with conventional motor-based eccentric rotating mass actuators.
The library includes 122 different haptics effects, and these can be sequenced and repeated with varying delays to give a wide range of tactile sensations with both eccentric rotating mass and linear resonant actuators. On top of this, the library also includes an audio-to-haptics feature, “which creates a haptics experience based on an audio input”, says TI.
It is based on the TouchSense TS2200 library from haptics firm Immersion. “Using the MSP430TCH5E solution allows implementation of haptics without patent infringement and without royalties,” said TI. Its audio interface is also based on an Immersion product, called Audio2Haptics.
The library is not pre-programmed into the device. It must be downloaded and programmed into each TCH5E.
Together, in response to commands over an I2C interface, the microcontroller and DRV2603 driver can act as a stand-alone vibration generator.
However, another feature of the MSP430TCH5E is that it is designed to execute TI’s capacitive touch library (SLAA490) at the same time as the haptics library, to produce vibrations in response to touch buttons, sliders, or wheels.
http://www.element14.com/community/docs/DOC-65011?ICID=knode-TIlaunchpad-space#anchor4
Looking very much like a games controller HapTouch “allows users to add vibrational feedback to all capacitive touch buttons, sliders and wheels, for use in mobile computing and gaming devices, industrial control panels, point-of-sale terminals and many other applications”, said Farnell.
It comes with a software development kit and, to work, has to be plugged into TI’s MSP-EXP430G2 LaunchPad board.
“Developers can also leverage the PC-based MSP430 Capacitive Touch Pro graphical user interface tool to evaluate, diagnose and tune capacitive touch button, slider and wheel designs in real time, featuring user-configurable ranging, recording and printing options,” said Farnell.
TI is not the only company to pair capacitive touch and haptic feedback. Atmel is another, and has an application note with an informative section on vibrator positioning in portable devices.
Welcome to SUV System Ltd!
SUV System Ltd is ISO 90012008 Certified electronics distributor with 10 years of experiences.
We have built up long term business relationship with about many companies which are stockers and authorized agents. we have a steady and reliable supply to meet customer's demands to the greatest extent .Confidently, we are able to lower your cost and support your business with our years of professional service.
SUV System Ltd is Electronic Components Distributor Supplies,Find Quality Electronic Components Supplies Products IC(Integrated Circuits),Connectors,Capacitor,Resistors,Diodes,Transistors,LED at Suvsystem.com. Sourcing Other Energy, Environment, Excess Inventory Products from Manufacturers and Suppliers at Suvsystem.com
Electronic Components distributor:http://www.suvsystem.com
Connectors Distributor:http://www.suvsystem.com/l/Connectors-1.html
IC Distributor:http://www.suvsystem.com/l/IC(Integrated-Circuits)-1.html
LED Distributor:http://www.suvsystem.com/l/LED-1.html
Capacitor Distributor:http://www.suvsystem.com/l/Capacitor-1.html
Transistor Distributor:http://www.suvsystem.com/l/Transistors-1.html
Resistor Distributor:http://www.suvsystem.com/l/Resistors-1.html
Diode Distributor:http://www.suvsystem.com/l/Diodes-1.html
SUV System Ltd insists on the managing faith ofsincereness,speciality,foresight, win-win,so we build up stable-relationship customers located all over the world, including the States, Europe, Argentina, UAE, Malaysia, Australia,and India etc
we are focus on the following fields,and hope we can help you.
LINEAR IC Diodes Inc Discrete Semiconductor Transistors Xilinx IC Vishay resistors High Precision Resistors BB IC Electronic News Bipolar Transistors Zener Diodes Fairchild Semiconductor Transistors SANYO IC Current Sensors Resistors Resistors HARRIS IC Fast Recovery Diodes INFLNEON Diodes DIODES Transistors Renesas parts IC Chip Fuses Transistors TOSHIBA Transistors Texas Instruments(TI) IC PANASONIC Capacitor chip Filter saws LITTELFUSE Diodes Resistor Networks Connectors TOSHIBA Diodes INTERSIL IC ELPIDA IC Multi-units Transistors NXP Diodes Thin Film Resistors Transistors Freescale Microchip IC NS IC Rectifier Diodes VISHAY IC
http://www.suvsystem.com/a/9078.aspx
No comments:
Post a Comment